Ei Electronics B16009-R0-160RC Series - Manual (Page 11)

13. TROUBLESHOOTING (CONTINUED)
beeps, a fault may exist. Disconnect the mains first and
replace the unit - see “
ALARM REMOVAL” section on page 2.
(2) Ionisation Smoke Alarms (Ei141/161RC) and Heat Alarms
(Ei144/164RC) give two beeps 10 minutes after the test/hush
button is pressed.
(3) If an Optical unit (Ei146/166RC) beeps without the red
light flashing at the same time, the chamber is defective.
Clean the chamber.
4. INTERCONNECTED ALARMS DO NOT ALL SOUND:
(1) Hold test button for 10 seconds after first alarm has
sounded to ensure signal is transmitted to all units.
(2) One or more of the connections may not be correctly
connected. We recommend you consult a qualified electrician.
Aico Ltd. Mile End Business Park, Maesbury Rd, Oswestry,
Shropshire SY10 8NN, U.K. Tel: 0870 758 4000
www.aico.co.uk
Ei Electronics. Shannon, Co Clare, Ireland. Tel: 061 471277
www.eielectronics.com
12
1
2
3
4
4
6
7
8
8
10
10
10
11
1. REGULAR CHECKS
2. ALARM REMOVAL
3. IMPORTANT INFORMATION
4. CHANGING THE BATTERY
5. TESTING & MAINTAINING YOUR ALARM
6. CLEANING YOUR ALARM
7. NUISANCE ALARMS
8. IMPORTANT SAFEGUARDS
9. PLANNING YOUR ESCAPE ROUTE
10. ALARM CONTROL
11. GETTING YOUR ALARM SERVICED
12. 5 YEAR GUARANTEE
13. TROUBLESHOOTING
INDEX
B16009-R0-160RC SERIES-U&C 17/1/07 11:13 AM Page 11