MCZ Gaudi - Manual (Page 9)

INSTALLATION AND USE MANUAL Chapter 3
GAUDI’ pag. 9
Chapter 3 Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.2. PHASE 1 - POSITIONING OF FORMA PUROB95 FIREPLACE STOVE
Place Forma PuroB95 in the desired position. Raise the fireplace stove so that the height of the edge-cover
profile is 150 mm above the floor.
A second adjustment of the unit, if necessary, is made during assembly of
the cladding.
Install the unit Forma Puro B95 in accordance with the instructions in the respective
Manual for Installation and
Use and run a quick test for proper operation. If the test is successful, you can install the Gaudi’ cladding.
PAVIMENTO PAVIMENTO
150 15
0
PROFILO
COPRIBORDO PROFILO
COPRIBORDO
3.3. PHASE 2 – CHANGING EDGE-COVER PROFILE
LATO
CARICAMENTO
LATO
SERVIZIO