MCZ Gaudi User Manual
Page 20
INSTALLATION AND USE MANUAL
Chapter 3
GAUDI’
pag.
20
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
Insert the pin of the
vertical profile in the hole of the tab of the front profile. Push the vertical profile against the
cladding side and lock it in place with an M4 nut (included).
A FILO
A FILO
The
front profile must be flush with the vertical profile and it must be inserted in the side profile (specially
shaped).
Installation of the Gaudi’ cladding is completed by anchoring the
side profile to the top and then all of the
structure upon which the hood will rest.
Fasten the profiles with the 2 steel ties provided. Anchor the ties to the ceiling as vertically as possible (pay
attention to the hold, considering the weight of the hood) and adjust the level of tension using the tensioner.