MCZ Toba HYDRO 22 - Manual (Page 6)

6
MENU
B
E
OFF
ON
ECO
MENU
B
OFF
ON
ECO
B
E
C
D
OFF MENU
10:13 TIMER1 ECO
25°
23° AUTO
TEMP VENT
1
10 - CONTROL PANEL
SCREEN OFF
If a LANGUAGE has already been set, the display will go to OFF.
By pressing any one of the keys (B, C, D, E) the first screen will appear with the wording OFF displayed. From this screen, pressing keys "B"
and "E" (respectively corresponding to ON and MENU) will make it possible to access the panel or the menu. If no key is pressed, the display
will once again show OFF after 5 seconds.
Lighting the stove
To switch on the stove, keep the "B" (ON) key on the panel pressed. The stove starts an ignition procedure that brings the flame to a
suitable level to Supply Power.
Supplying power
The power supply of the stove is indicated by “power level bars”: one bar corresponds to minimum power, 5 bars to maximum power;
this level is determined by the heating system heat requirements, the stove adjusts pellet loading parameters, fumes extraction, and
combustion air flow to comply with this requirement.
UPPER BAR: active requirements, active programmes, power bar, functions
CENTRAL BAR: room temperature, room set, room fan bar
LOWER BAR/KEYS: shut-off “B”, temperature set modify “C” and menu “E''
1 = power level bars
OFF-DISPLAY OFF OFF-DISPLAY ACTIVE