Positioning of control unit fc715 – MCZ FC700-715 - 180+180 m3/h User Manual
Page 13
Chapter 2
INSTALLATION AND USE MANUAL
page
13
Installation and assembly
Technical service – MCZ S.p.A. all rights reserved - Reproduction prohibited
2.6.3. Positioning of control unit FC715
The control unit must be placed on the floor, behind or alongside the
fireplace stove, in a zone that is accessible for maintenance and above
all far from the bottom of the structure as shown in
figure 17.
Make sure that the control unit does not come into hot metallic
parts of the fireplace stove, as it can be damaged by heat.
The equipment must be powered at 220V at 50Hz.
Correct connection to the earth system is vital.
Make sure that the cables do not come into contact with the
metal parts of the structure, as they get extremely hot.
Figure 17 – Position of control unit A and fan B.
B
A