Scanning over a network – Epson WorkForce DS-7500N User Manual

Page 17

Text mode
Original mode

Select Network, then click Add.

In the Add window, choose the Network Interface Panel’s IP address under Search for addresses, or select Enter
address

and type in the address. Then click OK.

In the Epson Scan Settings window, click Test to check the connection. If everything works properly, you see a
successful connection message appears.

Click OK to save the settings.

Scanning Over a Network

Note:
You must set the IP address for your Network Interface Panel before you can scan using it.

Note for Windows:
You need to install the latest Document Capture Pro before scanning. Go to the Epson home page to download the latest
Document Capture Pro.
U

http://www.epson.com

If the latest software is already installed on your computer, you do not need to update the software.

Network Interface Panel User's Guide

Scanning an Image