Epson Expression 1680 - Manual (Page 16)

Expression 1680/1680 Pro
A5-Format Quick Start Manual_E.fm
3/6/01 Left page
L
16
If you add the scanner to a system in which one of your SCSI devices already has a
SCSI ID of 2, change the ID number to an unused number using the rotary switch. See
the table below as a guide.
*Scanner will not work if selected.
c
Caution:
Do not set the SCSI ID to an ID number that is already assigned to another
device. Otherwise the computer, scanner, and other devices will not operate
properly.
ID Availability Description
0 Not available for Macintosh Used for hard disks
Not recommended for PCs Usually used for hard disks
1 Not recommended Usually used for hard disks
2 Available Factory setting of the scanner
3 Available Not available if your Macin-
tosh has a built-in
CD-ROM
4 Available
5 Available
6 Available
7 Not available for Macintosh Always used for the Macin-
tosh itself
May not be available for PCs. Usually used for the PC’s SCSI
board
✽ Not available For transportation purposes.*
See ”Transporting the Scan-
ner and the Transparency
Unit” in the Maintenance and
Troubleshooting section of
the online Reference Guide.