Epson EMP-TWD10 - Manual (Page 15)

13
Name Function
A
Power inlet port Connect the power cable.
s
p. 19
B
Service port This is the control port. It is not used during normal operation.
C
HDMI input port Connects an HDMI-format video device or a computer to the unit.
s
p. 46
D
Computer input port Can be connected to the RGB output port of a computer or the component video output port of a
video device.
s
p. 45, 46
E
Video input port Can be connected to the ordinary image output port of a video device.
s
p. 44
F
Optical Audio-Out port Can be connected to an audio device with an optical digital input port.
s
p. 50
G
Remote control light-
receiving area
Receives signals from the remote control.
s
p. 16
H
Air exhaust vent The air outlet of the unit after cooling.
Caution
Do not block the exhaust vents, and do not touch the exhaust vent immediately after projecting, or
while projecting, since it becomes hot.
I
Lamp cover open switch Press this button to open the lamp cover.
s
p. 66
J
Subwoofer output port Can connect an optional powered subwoofer to the unit.
s
p. 50
K
To Audio input port Can be connected to the audio output port of the connected video device or a computer.
s
p. 44,
45, 46
L
S-Video input port Can be connected to the S-Video output port of a video device.
s
p. 45
Rear
A
B
How to open the interface
cover
Press here to open.
H
J
L
K
C
D
G
F
I
E