Epson EcoTank ET-4550 User Manual
Page 10
B
For Windows 7: Click Start, Computer, and then Network.
For Windows Vista: Click Start and then Network.
C
Right-click the product icon, then click Install.
Click Continue in the User Account Control dialog box.
Note:
❏ The icon shows the network product name (e.g., EPSONXXXXXX (your product name)). The product name can
be confirmed on the product’s control panel or a network status sheet. For details on confirming on the control
panel or printing a network status sheet, see
“Displaying the network status and printing a network status sheet”
.
❏ If Uninstall appears instead of Install, click Uninstall once and retry (for Windows 7 and Vista).
D
Click Your devices are ready to use (Your device is ready to use).
Note:
Note for Windows 7 users: Skip steps 4 and 5.
E
Check the screen and click Close.
F
For Windows 8: Select Desktop > Settings charm > Control Panel, and then select View devices and printers.
For Windows 7: Click Start and then Devices and Printers.
For Windows Vista: Click the Start button, and then Network.
Note for Windows 8 users:
Follow the steps below if you cannot find the product icon.
1. Select Add a device.
2. Select your product, and then select Next.
3. Follow the on-screen instructions.
G
Verify that an icon with the network product name (e.g., EPSONXXXXXX (your product name)) is added.
To print using WSD, select the product by its network product name.
Note:
❏ To use the scanner function with WSD, use Windows Fax and Scan or Paint in Windows 8.1/8/7/Vista.
❏ The scanner name selected with Windows Fax and Scan or Paint in Windows 8.1/8/7/Vista is the same as the
network product name.
❏ When using commercially available software, see the User’s Guide that came with the software for the scanning
procedure.
Network Guide
Using the Product over a Network
10