EURO-WARE 178 - Manual (Page 17)

7
Getting Started
Simulator Mode
Each page of the GPSMAP 178/178C Sounder’s system also features an options page, which gives
you access to other functions and features that relate to the specific page you are viewing. To get a feel for
how the option pages work, let’s put the GPSMAP 178/178C Sounder into simulator mode.
To activate the simulator mode:
1. Press the MENU key twice for the Main Menu. Press Up or Down on the ARROW KEYPAD until the
‘GPS’ tab is highlighted, then press the MENU key once.
2. Use the UP or DOWN arrow of the ARROW KEYPAD to highlight the ‘Start Simulator’ option and
press ENTER. Choose ‘No’ to the retail demonstration and press the ENTER key.
3. Press the ENTER key to confirm the ‘Running Simulator’ message that appears at the bottom of the
display. ‘Simulating’ appears at the top of the Main pages.
While in Simulator mode, a ‘Running Simulator’ message appears after 2 minutes of inactivity. Now
you’re ready to continue the rest of the simulated tour. Keep in mind that the GPSMAP 178/178C
Sounder does not track satellites in simulator mode, and this mode should never be used for
actual navigation. All the waypoint and route planning done in simulator mode is still retained in
memory for future use.
A “Running Simulator” message
appears after 2 minutes of
inactivity.