Enterasys Networks SecureStack C2RPS-CHAS2 - Manual (Page 29)

Connecting the PSM Cables and AC Power Cords
SecureStack C2 Installation Guide 2-7
Figure 2-5 C2RPS-PSM Cable and AC Power Cord Connections
5. On certain switches, an LED indicator will show that a redundant power supply is
now in operation.
.
This completes the installation.
1 Switch device 4 Switch device Redundant Power Supply connector
2 PSM cable 5 AC power cord (type varies depending on country)
3 PSM Redundant Power Supply
connector
6 AC power outlet with ground connection
(type varies depending on country)
Note: No change in switch device configuration is necessary for this installation.
AC LINE
100-240 VAC
50-60 Hz
2A MAX
Redundant Power Supply
Redundant Power Supply
AC LINE
100-240 VAC
50-60 Hz
0.8 A MAX
MAC ADDRESS SERIAL NO.
STACK UP STACK DOWN
А
Б
Г
В
Д
Е