Enterasys Networks SecureStack C2RPS-CHAS2 - Manual (Page 18)

C2RPS-CHAS2 Chassis
1-2 Introduction
C2RPS-CHAS2 Chassis
The chassis is a two‐slot frame without AC power connections or electronics. The chassis
can be installed in a standard 19‐inch rack and populated with one or two PSMs. Each
PSM operates independently.
Figure 1‐1 shows the front view of the chassis without
PSMs. Figure 1‐2 and Figure 1‐3 show the front and rear views of a fully populated
chassis.
Figure 1-1 SecureStack C2RPS-CHAS2 (front view without PSM)
_______________________________________________________________________________
Figure 1-2 SecureStack C2RPS-CHAS2 (front view with two PSMs)
_______________________________________________________________________________
Figure 1-3 SecureStack C2RPS-CHAS2 (rear view with two PSMs)
_______________________________________________________________________________
C2RPS-CHAS2
C2RPS-CHAS2
C2RPS-PSM
Power
C2RPS-PSM
Power
AC LINE
100-240 VAC
50-60 Hz
2A MAX
Redundant Power Supply AC LINE
100-240 VAC
50-60 Hz
2A MAX
Redundant Power Supply