Enterasys Networks XSR-1805 User Manual
Page 7
![background image](/manuals/83478/7/background.png)
The hardware components for the XSR-18xx modules vary slightly to meet
the performance level for each module. The XSR-1850 is an enhancement
of the XSR-1805 consisting of the following additional features:
• Two fans
• External power source connector
• One PMC slot for PPMC card
• 19” 1.5 U rack-mount chassis
• 64 MB of DRAM
Due to the large difference in performance levels, the XSR-3250 hardware
components vary quite significantly, when compared to the XSR-18xx
modules. The main differences include the following:
• Different processor with two CPU cores
• Different hardware encryption accelerator
• Two extra NIM Carrier Cards (NCC) slots with two NIM slots on
each card
• One extra Ethernet port connected to both a miniGBIC module and
a RJ45 connector
• Dual load-sharing power supplies
• Redundant fans
• 256 MB of DRAM
XSR NIMs will operate on all three XSR modules.
All three modules use the software version XSR Release 6.3. The
modules software components consists of three separate executables
linked individually:
• Bootrom
• Power-up Diagnostics
• Software image
© Copyright 2003
Enterasys Networks
Page 7 of 25
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.