Enterasys Networks XSR-1805 - Manual (Page 13)

Management key; create DSA
host key for
SSHv2; create
management users
and set their
password and
privilege level;
configure the
SNMP agent configuration data access), DSA host
key pair (read/write
access), Crypto
Officer’s password
for CLI and SNMP
(read/write access)
Configuring the
T1/E1 Subsystem
Interfaces Define the T1/E1
subsystem
functionality Commands and
configuration data Status of
commands and
configuration data None
Configuring the
XSR Platform Define the platform
subsystem
software of the
module by entering
Bootrom Monitor
Mode, File System,
fault report,
message logging,
and other platform
related commands Commands and
configuration data Status of
commands and
configuration data None
Configuring
Hardware
Controllers Define
synchronization
features for module Commands and
configuration data Status of
commands and
configuration data None
Configuring the
Internet Protocol Set IP functionality Commands and
configuration data
Status of
commands and
configuration data None
Configuring Frame
Relay Define Frame
Relay interface
features Commands and
configuration data Status of
commands and
configuration data None
Configuring ISDN Configure BRI/PRI
functionality on
module Commands and
configuration data Status of
commands and
configuration data None
Configuring Quality
of Service (QOS) Configure QOS
values for module Commands and
configuration data Status of
commands and
configuration data None
Configuring the
VPN Configure Public
Key Infrastructure
(PKI); configure the
Internet Key
Exchange (IKE)
Security Protocol;
configure the
IPSec protocol Commands and
configuration data Status of
commands and
configuration data RSA keys pair
(read/write
access), Preshared
key (read/write
access)
Configuring DHCP Configure DHCP
on module Commands and
configuration data Status of
commands and
configuration data None
Configuring
Security Define security
features for
module, including
Access List, AAA,
and firewall
functionality Commands and
configuration data Status of
commands and
configuration data AAA user
password
(read/write
access), RADIUS
password
(read/write access)
Configuring Define the Commands and Status of None.
© Copyright 2003 Enterasys Networks Page 13 of 25
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.