Extron electronic ISM 482 - Manual (Page 80)

6-9 Integration Scaling Matrix Switcher • Ethernet Operation
I/O Configuration Page
You can set up the input configurations and the output format on the I/O
Configuration page (figure 6-7). Access the Setup page by clicking the I/O Config
tab.
Figure 6-7 — I/O Configuration page
Input configuration
You can specify the format of each input. The available formats are RGB, RGBcvS
(identified as RGBcS in the drop-down box), YUVi, YUVp, Betacam 50, Betacam 60,
HDTV, S-video, and composite video. Specify the input format as follows:
1 . Click in the desired input’s Configuration field. A drop-down box appears
(figure 6-8).
Figure 6-8 — Input configuration drop box
2 . Click the desired input format.
3 . Click the Submit button.