Ericsson GH198 - Manual (Page 47)

5. Enter the new PIN and press S. ‘‘AGAIN?’’ is
displayed.
6. Enter the new PIN again and press S. If you
entered the SIM Unblocking Code and the new PIN
correctly, ‘‘UNLOCKED’’ is displayed briefly. You
can now use your phone anew.
If the message ‘‘SIM BLOCKD’’ is displayed, it
indicates that the SIM is blocked.
If the message ‘‘SIM UNUSE’’ is displayed, the SIM
cannot be unblocked. Contact your network
operator.
15. Any Key
This function will only be available if the phone is used with
hands-free equipment.
This Special Function allows you to answer a call by
pressing any key,
except the Power key.
1. Press M and then enter 15. The current setting,
either
‘‘ANYKEY OFF’’ or
‘‘ANYKEY ON’’, is displayed.
2. Turn the Any Key function ON or OFF by pressing
any numeric key.
3. Store the new setting by pressing S, ▲ or ▼ .
16. Language Selection
This Special Function allows you to select a language other
than English to be shown in the display.
1. Press M and then enter 16. The current language,
for example ‘‘ENGLISH’’, is displayed.
2. Press any numeric key (repeatedly) until the desired
language, for exam-
ple‘‘DEUTSCH’’, is displayed.
3. Store the new setting by pressing S, ▲ or ▼ .
From now on, all messages appearing in the
display will be in the language you selected.
17. Area Code
This Special Function allows you to choose an area code
that will be inserted automatically before a phone number
when you make a call.
If you enter an area code yourself, before a phone number,
the automatic area code will, of course, not be added to the
number, nor will it be added to the emergency number 112,
or to a number that begins with an international prefix, or
with
* or #.
You can only use the Area Code facility in the
country where it was entered and stored.
Special Functions
42