Silvercrest SKRD 30 A1 - Manual (Page 25)

23
Troubleshooting
SKRD 30 A1
GB
IE
CY
Troubleshooting
In this section you receive important information for the localization and remedying
of malfunctions. Observe the instructions in order to avoid danger and damage.
Safety instructions
WARNING
Observe the following safety information to avoid danger and property
damage:
Repairs to electronic devices may only be carried out by specialists who ►
have been trained by the manufacturer. Considerable danger to the con-
sumer and damage to the device can occur as a result of incorrect repairs.
Malfunction causes and remedies
The following table will help with localizing and remedying minor malfunctions:
Defect Possible cause Solution
The display 3 is
showing nothing.
The plug is not inserted.
Insert the plug into the
mains power socket.
Mains power socket is
not supplying power.
Check the circuit fuse.
No sound
The volume is set to
minimum. Increase the volume with the
VOLUME
14 knob.
The radio is switched off .
Switch the radio on with the
On/Off
4 button.
Noisy radio
reception
The radio station is not
properly tuned in. Tune the station correctly with the
buttons Tune+
13 and Tune– 12 .
Reception is too weak.
Try to improve reception by moving
the wire antenna
15 .
NOTICE
If you cannot solve the problem with the aforementioned methods, please ►
contact Customer Service.