Silvercrest SKRD 30 A1 - Manual (Page 18)

16
Handling and operation
SKRD 30 A1
GB
IE
CY
Programming the kitchen timer
You can preprogramme the kitchen timer with the most frequently used times so
that it is not necessary to continually reenter them. Up to 10 times can be prepro-
grammed. All 10 memory slots are preprogrammed with 10 minutes as standard.
For the programming of the kitchen timer proceed as follows:
Press the button Snooze/Timer ♦ 14 to activate the kitchen timer.
Turn the VOLUME ♦
14
knob to set the time to be programmed. Turning in a
clockwise direction increases the time; turning in a counter clockwise direc-
tion reduces the time.
Press the button Lock/Mem. ♦ 6 to activate the timer selection. Under the
kitchen timer saucepan symbol a blinking is shown.
Select with the buttons Preset+ ♦ 11 and Preset– 10 a memory slot between
and for the timer that is to be set.
Press the button Lock/Mem. ♦ 6 again to programme the set time on the
selected memory slot. The blinking under the saucepan symbol is now show-
ing constantly.
Repeat the process for the other memory slots. ♦
Accessing the kitchen timer
To access a programmed time for the kitchen timer proceed as follows:
Press the button Snooze/Timer ♦ 14 to activate the kitchen timer.
Select with the buttons Preset+ ♦ 11 and Preset– 10 the desired timer between
and .
Press the button Snooze/Timer ♦ 14 again to start the kitchen timer.