Handling and operation, Gb ie cy, Setting the time of day format – Silvercrest SKRD 30 A1 User Manual

Page 15: Setting automatic display dimming

Handling and operation

SKRD 30 A1

Select with the buttons Preset+

♦

and Preset–

the memory slot for the

date to be set.

Set with the buttons Tune+

♦

and Tune–

the date for this memory slot.

With each button press the date is changed by one day. Holding down the
respective button for more than 2 seconds starts the speed setting.

NOTICE

Press the Dimmer/AOT

►

button if you want to switch oﬀ the date

for the currently set date. The reminder now occurs every year on the
same date. . To deactivate the memory function, programme in a date
that lies in the past.

Press the button Lock/Mem.

♦

to set the time of day at which the reminder

function is to be triggered. The setting is carried out with the buttons Tune+

and Tune–

on the hour between 00 and 23. This setting applies to all

programmed reminder dates

Press the Bass/AMS/Mode

♦

button again to save the current setting and

move to the next menu item.

Setting the time of day format

Prerequisite: The device is in the operational mode clock/standby operation.

Press the Bass/AMS/Mode

♦

button four times. The current setting for the

time of day format is shown ( =24 hour format or =12 hour format).

With the button Tune+

♦

set the time of day format to if you want a time

of day display in the 24 hour format .

With the button Tune–

♦

set the time of day format to if you want a time

of day display in the 12 hour format .

Press the Bass/AMS/Mode

♦

button again to save the current setting and

move to the next menu item.

Setting automatic display dimming.

Prerequisite: The device is in the operational mode clock/standby operation.

Press the Bass/AMS/Mode

♦

button ﬁ ve times. The current setting for the

automatic display dimming is shown ( = function switched on or

function switched oﬀ ).

With the button Tune+

♦

set the function if the display illumination

should be switched on and oﬀ at a setable time.

With the button Tune–

♦

set the function

if the display illumination is

to be switched on permanently.

Press the Bass/AMS/Mode

♦

button again to save the current setting and

move to the next menu item.