Epson 5000 User Manual

Page 82

Cut-Sheet Feeders

Insert up to 50 sheets of paper along

the

left paper guide.

Adjust

the

position of the right paper guide so that it

matches

your paper’s width. Make sure the position of the guide allows

the paper to move up and down freely.

Push the paper-set levers back to clamp the paper against the

guide rollers.

If necessary, attach the stacker-support wires (that come with

the cut-sheet feeder) to the edge guides of

the

paper guide.

Replace the paper guide by placing the notches on the paper
guide straight down over the mounting posts on the printer.

Lower the paper guide into position and then slide the edge
guides to the middle.

Note: When the cut-sheet feeder is installed, you can still load

single sheets using the top paper guide or the front paper slot.

The cut-sheet feeder automatically loads paper when you send print

data to

the

printer (as long

the

PAUSE

light is not on). You can

also load paper from

the

cut-sheet feeder by pressing the

LOAD/EJECT

button.

Using Printer Options 4-5