Sealey MC450RL User Manual
Page 2
3.1. General preparation.
p
WarNiNG! ensure that you read, understand and apply the safety instructions in
Section 1 before use.
3.1.1. Prepare the motorcycle as described in the instructions for the MC450 Hydraulic
Motorcycle Lift.
3.1.2. Place the motorcycle rear lift on to the platform of the MC450 motorcycle lift and position
the motorcycle rear lift saddle under the motorcycle manufacturer’s recommended
swinging arm lifting point.
3.2. raising the rear of the motorcycle.
3.2.1. using a 17mm socket and ratchet turn the hexagonal drive clockwise to bring the
motorcycle rear lift saddle into contact with the recommended swinging arm lifting point.
3.2.2. Ensure the motorcycle rear lift is vertical before continuing to turn the hexagonal drive
clockwise and raising the motorcycle to the required working height. turn the hexagonal
drive slowly and evenly to ensure no sudden movements of the motorcycle.
Do Not use
an impact wrench.
3.3. lowering the rear of the motorcycle.
3.3.1. turn the hexagonal drive anti-clockwise and lower the motorcycle. Lower slowly to ensure
no sudden movements of the motorcycle.
Do Not use an impact wrench.
p
Safety WarNiNG! Always lower in a slow and controlled manner and ensure there
are no persons or obstacles beneath the motorcycle, or in the path of it’s descent.
iMPortaNt: only fully qualified personnel should attempt maintenance or repair.
4.1. Keep the motorcycle rear lift clean and lubricate all moving parts with a suitable oil on a
regular basis.
4.2. Before each use check for broken, cracked, bent, or loose parts, or any visible damage to
welds, saddle, frame and all parts including nuts, bolts, pins and other fasteners. If any
suspect item is found remove from service and take necessary action to remedy the
problem.
Do Not use if believed to have been subjected to abnormal load or shock.
Inspect and take appropriate action.
iMPortaNt: No reSPoNSiBility iS accePteD for iNcorrect USe of tHe Motorcycle rear lift.
3. oPeratiNG iNStrUctioNS
4. MaiNteNaNce
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPortaNt: no liability is accepted for incorrect use of this product.
WarraNty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
iNforMatioN: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
MC450rL Issue: 1 - 19/10/11