Fig.2 fig.3 – Sealey MPS2 User Manual
Page 2
5.1. Position the motorcycle alongside the centre stand and slide it underneath.
5.2. Whilst holding the handlebars push down on the centre stand handle to bring the stand upright, see fig.2. Push the handle down to the
floor to bring the stand to its over centre position, see fig.3.
6.1. Before each use, check all parts. If any part of the stand is damaged or defective, remove it from service and take the necessary action
to remedy the problem.
6.2. Keep the stand clean and wipe off any oil or grease.
6.3. When the stand is not in use, store it in a safe, dry, childproof location.
MPS2 Issue: 1 - 03/06/14
5. OPERATION
6. MAINTENANCE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Original Language Version
© Jack Sealey Limited
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
fig.2
fig.3