Fig.1 fig.2, Charging, Operation – Sealey LED2105F User Manual
Page 2: Maintenance
![background image](https://www.manualsdir.com/files/847651/content/doc002.png)
4. CHARGING
V
IMPORTANT WARRANTY INFORMATION:
the battery fitted to this cordless tool is considered to be a consumable item and its
ability to accept a charge will reduce over time. We will warranty it against
mechanical and electrical defect for a period of one year - this does not cover fair
wear and tear. If the battery is not properly charged before first use, or regularly
conditioned, its capacity will diminish. Under these circumstances we will not
replace the battery even if it is less than one year old.
Note: fully charge the battery before first use.
Note: The Lithium battery does not suffer from memory effect and once fully
charged may be stored for up to six months without another charge.
4.1. Connect the charger into the charge socket on back of the lamp (Fig.2A). Plug into
power supply and turn on, the charging LED (Fig.1A) on the lamp will light RED to show
charging has commenced.
4.2. When the battery has fully charged the LED will turn GREEN.
5. OPERATION
5.1. Direct the lens away from your eyes before switching on.
5.2. Toggle the lamp between 5 LED, 21 LED and OFF using the push switch on the handle
(Fig.1B).
5.3. Suspend the lamp by the hanging hooks. When the light is hanging from one hook it can
be rotated through 360° for more precise positioning.
5.4. Alternatively use the integral magnets to attach the lamp to any ferrous surface.
6. MAINTENANCE
6.1. To replace the shatter proof lens, use a small screwdriver to prise the lens off through
the gap between the rubber ON / OFF switch and lens. Gently flex the lens to remove it
completely.
6.2. When replacing the lens insert the top tab in first and bend the lens to insert the bottom,
snap the rest of the lens into the lamp.
Note: LED arrays are designed to allow individual LEDs to cease functioning without
causing the entire array to fail. This could be as a result of shock or impact. Shock or
impact will invalidate the warranty.
fig.1
fig.2
LED2105F | Issue 3(I) 17/03/15
Original Language Version
© Jack Sealey Limited