Sealey WB951LED - Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.1 GENERAL SAFETY
 Familiarise yourself with this product's application and limitations, as well as any specific potential hazards peculiar to the beacon.
 Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty.
 DO NOT use the beacon for any purpose other than for which it is designed.
 DO NOT allow children to operate the beacon.
 DO NOT operate the beacon if any parts are missing or damaged as this may cause failure or possible personal injury.
 When not in use switch the beacon off and where appropriate remove plug from power supply.
2. TECHNICAL SPECIFICATIONS
Voltage:...................................................................................12V-24V dc
Current:.......................................................................................... 450mA
Number of LEDs: .................................................................................. 40
Index of protection (EN 60598-1): .....................................................IP56
Operating Temperature:....................................................-30°C to +50°C
Radio Interference Filter:.......................... ......... EC95/54 EMC approved
Approvals:......................................................................................ECE65
3 . INTRODUCTION
Model No’s:
WB951LED,WB952LED,WB953LED,WB954LED,WB955LED
INSTRuCTIONS FOR:
LED WARNING BEACONS 12/24Volt
VARIOUS FITTINGS
Heavy-duty ABS bases. Quick release uV stabilised domes will not fade when exposed to sunlight. Features 40 LEDs for an increased output
of light. 3-Function control allows for different LED configuration depending on operation. CE Approved and E-Marked.
WB951LED
ø128mm
Overall height: 200mm
Length of mounting: 40mm
WB952LED
ø140mm
Height: 190mm
WB953LED
ø128mm
Height: 200mm
WB955LED
ø128mm
Height: 250mm
ø140mm
Height: 170mm
WB954LED
WB951LED,WB951LED,WB953LED,
WB954LED,WB955LED
ISSuE: 1 12/12/13 Original Language Version © Jack Sealey Limited