Fig.3 – Sealey LED120 User Manual
Page 2
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPortaNt: no liability is accepted for incorrect use of this product.
warraNtY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
iNforMatioN: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole Uk distributor, Sealey group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
iP32 7Ar
www.sealey.co.uk
Web
environmental Protection.
recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner which is compatible
with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid waste
authority for recycling information.
3.1.3. this LED floodlight develops minimal heat and is not subject to
the same mounting restrictions that apply to halogen lamps
that become too hot to touch. We do however recommend that
the floodlight should not be placed in cramped or restrictive
positions and should be fixed at the following minimum
distances between the light and any surface/object. see fig.2.
● 500mm minimum between the top of the light and any
overhead surface, or objects, i.e. ceilings, overhangs.
● 200mm between sides of light and end or side walls, surface
or objects.
● 2 metres minimum between the front of the light and any
object to be illuminated.
3.1.4. fix the light to vertical surface with appropriately strong screws
or bolts.
3.1.5. Ensure the unit is connected to the electrical supply by a
qualified electrician in accordance with the wiring instructions in
section 1.1.9.
3.2. geNeral
● Clean the light with a dry, dust-free cloth.
●
do Not use solvents, or abrasives to clean the light.
● Avoid touching the glass shield (as handling may
reduce its serviceable life and cause the glass to crack. if
necessary clean the shield with alcohol and a soft cloth.
●
do Not use the light without the glass shield.
●
do Not use the light without the weather seals intact.
3.3. light SoUrce
the LED light source is designed to last the lifetime of the
product and is not a user serviceable item. in the event of light
source failure the product should be returned to you local
sealey dealer for servicing.
fig.3
Original Language Version
LED120 issue: 1 - 17/07/12
© Jack sealey Limited
Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email [email protected] or phone 01284 757500.