Cleaning and maintenance – Ultimate Speed 12V CAR ADAPTOR User Manual
Page 32
34 GB/MT
the contacts of the connector socket and the 12-Volt connector
plug
1
lie on top of each other.
Now insert the connector plug of the device you wish to attach
into the 12-Volt connector socket
3
or the USB port
4
.
Note:
Please ensure that the additional device is switched off
when you connect it to the vehicle adapter.
CAUTION! RISK OF DAMAGE TO PROPERTY! The max.
load for all devices attached to the car adapter is 6.3 A. Do
not load more than that onto the car adapter.
Note: You must comply with the directions for use of each
manufacturer.
Press the ON / OFF switch
2
in order to turn the vehicle
adapter on.
Switch on the devices you have plugged into the car adapter.
Turn the additional connected devices off when you are no
longer using them.
Press the ON / OFF switch
2
in order to turn the vehicle
adapter off.
Disconnect the attached devices from the 12-Volt connector
socket
3
or the USB port
4
when you are no longer using
them.
Cleaning and maintenance
The device should only be cleaned on the outside with a soft
dry cloth.
Under no circumstances should you use liquids or detergents,
as these will damage the device.
18.10.10 13:57