Epson ActionNote - Manual (Page 98)

2. Type VGACONF and press You see this main menu:
MAIN MENU
Display Statue Display current user options
Select option Select user option
Standby Timer Standby timer control
Quit Quit and return to DOS
3. Use
o r
to highlight the selection
you want and press Then see the appropriate section
below.
Display Status
The Display Status option displays the current VGACONF
settings. For example:
Display Status
Reverse video is set to enable text and disable graphics
Bold font is disabled
Contrast enhancement is
Expanded mode is enabled
set to automap
Vertical position is set to center unexpanded mode
Display type is set to panel
16 bit ram access is enabled
Font load is inhibited
Full height cursor is disabled
RGB weighting is set to 5:9:2
Timer is set to disable power saver mode
Press any key to return to the main menu.
Using the VGA Utilities 6-7