Epson ActionNote - Manual (Page 97)

4.
5.
6.
7.
Start WordPerfect.
T
O
display the Setup menu, press
Select Display
by typing 2.
If you are installing the driver for text mode, select Text
Screen Type. If you are installing the driver
forgraphics
mode, select Graphics Screen Type.
8.
Move the cursor until Cirrus Logic
VGA
appears on the
list, and choose SELECT. The program displays a list of all
the resolutions supported by the Cirrus Logic text driver.
9.
Select the desired resolution.
10. Press to exit. Your selection is saved and used for
displaying text and the print preview and graphics
functions of WordPerfect.
Using the VGACONF Utility Program
The Reference diskette includes one utility program,
VGACONF, which is located in the UTILS directory. This utility
allows you to change your system’s default graphic
configuration.
Note
You may want to copy this program to a directory on your
hard disk for convenience; if so, log onto that directory
before running the program.
I
Follow these steps to run VGACONF:
1. Log onto the directory that contains the VGACONF.EXE file.
This is either A:\UTILS or a directory on your hard disk.
6-6 Using the VGA Utilities