Epson ActionNote - Manual (Page 117)

3. Is the card formatted? Some PC cards must be formatted
before you can use them. See the documentation that came
with the card for instructions.
4. Did you install the PC card driver from your Reference
diskette? See the file named PCREADME.TXT on your
Reference diskette for instructions.
5. Did you install any socket services software or card services
software that came with the card? See the documentation
included with your card for instructions.
6. If none of these solutions solves your PC card problem,
contact the card manufacturer or call the Epson Connection
for assistance.
Mouse or Pointing Device Problems
If you installed a mouse or other PS/2 compatible pointing
device and it doesn’t work properly, try these solutions:
1.
2.
3.
4.
Is the mouse or pointing device connected properly? Make
sure you connected it to the adapter as described in
chapter 5.
Did you install any necessary drivers and load them into
your computer’s memory? See the documentation that
came with your device for instructions.
Did you run SETUP to disable the built-in trackball? See
Chapter 2 for instructions.
If you are still having trouble, check the documentation that
came with the device for troubleshooting information or
contact the manufacturer for assistance.
A-14 Troubleshooting