Miomare Z29601GB - Manual (Page 13)

13 GB/MT
Tip: The hand shower 1 has a water-
stop function: Slightly dripping water will
remind you to turn off the shower.
Mounting
Tip: For fittings with 3/4” connection, use an
adaptor with 3/4” inner thread and 1/2” outer
thread, available in DIY store or bathroom shops.
Tip: A water-saving insert 4 is included in your
shower rod set.
Operation
How to adjust the hand shower
Adjust the height of the hand shower holder 10
by using the adjustment knob 16 .
Adjust the angle at which the hand shower 1
is tilted by using the hand shower holder 10 .
Shower functions
Turn the hand shower lever 15 to set the hand
shower 1 function you wish to have (see Fig. E).
The hand shower 1 has the following
functions:
Massage
Spray + Massage
Spray
Spray + Bubbling
Bubbling
Water-saving insert
The water-saving insert 4 reduces the flow of water. This
may have an effect on how your continuous-flow water
heater works. If the flow of water is too low, your con-
tinuous-flow water heater will automatically switch off.
Cleaning and care
Clean the product with a soft, damp cloth and
use a mild cleaning agent if necessary.
Remove the limescale on the shower rod set
by using a commercially available limescale
remover. Please follow the directions for using
your cleaning agent.
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.