Miomare Z29601GB - Manual (Page 4)

4 GB/IE
Mounting
Tip: For fittings with 3/4" connection, use an
adaptor with 3/4" inner thread and 1/2” outer
thread, available in DIY store or bathroom shops.
Tip: A water-saving insert 4 is included in your
shower rod set.
Operation
How to adjust the hand shower
Adjust the height of the hand shower holder 10
by using the adjustment knob 16 .
Adjust the angle at which the hand shower 1
is tilted by using the hand shower holder 10 .
Shower functions
Turn the hand shower lever 15 to set the hand
shower 1 function you wish to have (see Fig. E).
The hand shower 1 has the following
functions:
Massage
Spray + Massage
Spray
Spray + Bubbling
Bubbling
Water-saving insert
The water-saving insert 4 reduces the flow of water.
This may have an effect on how your continuous-flow
water heater works. If the flow of water is too low,
your continuous-flow water heater will automatically
switch off.
Cleaning and care
Clean the product with a soft, damp cloth and
use a mild cleaning agent if necessary.
Remove the limescale on the shower rod set
by using a commercially available limescale
remover. Please follow the directions for using
your cleaning agent.
Disposal
The packaging is made entirely of
recyclable materials, which you may dis-
pose of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.