Eagle Electronics FISHSTRIKE 1000C - Manual (Page 90)

82
Map with Sonar split screen.
When this screen is activated, you need to specify which side of the Menu,
is active. To toggle between the two windows, press
PAGES | PAGES . The
window with the blue title bar at the top of the screen is the active window.
To switch back, just press
PAGES | PAGES again.
Sonar Simulator
This unit has a built-in simulator that lets you run it as if you were on
the water. All sonar features and functions are useable. When in
simulator mode, you will see the chart file name in the Sonar Page title
bar and a play symbol will flash on and off at the right end of the title
bar. To use the simulator:
1. From the Sonar Page, press MENU | MENU |
↓ to
S ONAR S ETUP
| ENT |
↓ to
S
ONAR
S
IMULATOR
ENT | ENT .
Main Menu with Sonar Setup command selected (left). Sonar
Simulator menu, with simulator turned on (right).
NOTE:
With Simulate Position checked, the simulator will also
automatically run the GPS simulator (if GPS data was recorded
with the sonar log).