Eagle Electronics FISHSTRIKE 1000C - Manual (Page 183)

175
Find Highway Exits command (left) and Find Exit menu (right).
2. First, select a highway name by pressing ENT , which calls up the F
IND
B Y N AME
menu. There are two highway search options : A. You can spell
out the highway name in the top selection box. Press
↑ or ↓ to change
the first letter, then press
→
to move the cursor to the next letter and
repeat until the name is correct, then press ENT | ENT. B. Or jump down
to the lower selection list by pressing ENT, then press ↓
or
↑ to select a
highway from the list , then press ENT.
Find By Name menu.
3. Once you have selected a highway name you can then select an exit.
Press ↓ to switch to the Exit List, then press
↓ or ↑ until you highlight
the exit, then press ENT.