Eagle Electronics FISHSTRIKE 1000C - Manual (Page 138)

130
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press ↓ to select route name| ENT | ↓ to N
AVIGATE
| → to R
EVERSE
| ENT | ←
to N
AVIGATE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT |
←
to Y ES
| ENT .
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the waypoint 001. In Fig. 2, the traveler
has arrived at Wpt 001 and the arrival alarm has been triggered.
Trails
Delete a Trail
This is the command used to delete a trail:
Press
MENU | MENU |
↓ to
M Y T RAILS
| ENT |
↓ to trail name|
ENT |
→
to
D ELETE T RAIL
| ENT |
← to
Y ES
| ENT .
Tip:
You can also delete all trails at once:
1. Press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT .
2. Press → to D
ELETE
A
LL
| ENT |
← to
Y
ES
| ENT .
Edit a Trail Name
To edit a trail name: press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail
name| ENT | ENT . Press
↑ or↓ to change the first character, then press →
to the next character and repeat until the name is correct. Press ENT
then EXIT | EXIT | EXIT | EXIT to return to the previous page display.
Figure 2. Figure 1.