Miomare H10102 - Manual (Page 3)

66739/11 CB4 manual Size: A5
2
66739/11 CB4 manual Size: A5
warning! Using the water stop function may alter the
temperature of the water. Check the water temperature before
stepping into the shower.
Using the water saving insert (D) may reduce the functioning
of your water heater. If not enough water comes through, the
water heater will switch off.
Function
Simply turn the shower head to change the shower function
as desired.
cleaning and maintenance
Use only a mild detergent for cleaning and care.
Limescale deposits on the shower head can be easily removed
by rubbing the rubber nubs. Rinse off the limescale deposit.
disposal
Please dispose of this item in accordance with local waste
disposal regulations.
Disposing of the packaging
Dispose of all packaging components in an
environmentally friendly manner.
Shower Set
Model No.: H10102
Version: 07/2011
inStructionS
warning!
PLEASE READ THE INSTRUCTIONS BEFORE USE!
PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE!
THIS IS NOT A TOY!
KEEP OUT OF THE REACH OF CHILDREN.
Read the operating instructions carefully and use the product
as described in the instructions to avoid injury and damage.
We accept no responsibility for damage resulting from failure
to comply with the safety instructions.
Terms used in these safety instructions:
Warns against risk of injury.
The word danger warns of possible risks of severe or fatal
injury.
The word caution warns of possible risks of minor injury
or damage.
Points to further information.
Intended use
Shower riser set for private use.
warning!
Suitable for use with all pressure-resistant hot water systems
such as central heating, continuous-flow water heater, pressure
boiler etc.
Not suitable for use with non-pressurised water heaters such
as boilers, non-pressurised reservoirs etc. In case of doubt,
consult a professional plumber or technical consultant.
Safety instructions
caution - damage to property
• Assembly should only be carried out by an experienced
person!
• Before wall mounting, check that the wall can take
the weight of the shower riser set. If in doubt, ask in a
specialist shop.
• Caution! Water damage! Before drilling, ensure that
there are no water pipes where you intend to drill.
danger of injury
• The shower riser should not be used to attach or support
anything, as the fixings and the riser are designed to
support only their own weight.
• Warning! Adjusting the shower head may change the
temperature of the water coming out. Check the water
temperature before stepping into the shower.
caution
Please mount the lower wall bracket first.
For fittings with 3/4” connection, use an adaptor with 3/4”
inner thread and 1/2” outer thread, available in DIY Store or
bathroom shops.
GB
Water stop
Water saving insert (D)
1 3 4
5
2
B
D
D