Efficient Networks SpeedStream 5600 Series - Manual (Page 13)

12 Installation Instructions Efficient Networks, Inc.
Installation Instructions
NOTE: The labels for the back panel of the router are located on the
underside of the unit.
1 Be sure the Power switch is in the OFF position.
2 Connect the power cable to the power connector on the back of the
router; then connect it to a power outlet.
3 To connect the router directly to the Ethernet port on a PC,
workstation or laptop, use the gray RJ45 cable, which is a
straight-through UTP copper wire cable. The cable labeled “
XOVER ”
on one end is a crossover UTP copper-wire cable that must be used
only when connecting the router to an Ethernet hub.
4 Connect one end of an RJ11 telephone cable to the router’s DSL port
and the other end to the DSL service port (wall jack).
5 Depress the router’s power button to turn on the unit.
Power
(Out=OFF, In=ON)
DSL
Connection
Ethernet
Connection
Power
Connection Serial
Port
to computer
to phone line
(optional)
GRAY RJ45
Computer
wall jack
Router
RJ11(phone)
Cable
Plug cable
into DSL
Power
Ethernet Cable