Florabest FLB 3000 A1 - Manual (Page 15)

14
GB
position, otherwise have the machine inspected
by an authorised customer service firm.
• The shredder wheel is blocked: Check
whether an object has been sucked in that is
too large; a piece of wood, cardboard or other
object has become jammed between the impel-
ler and shredder chamber. If the shredder wheel
remains blocked have the machine inspected by
an authorised customer service firm.
• If the machine vibrates, please immediately
stop using it. Have the machine inspected by
an authorised customer service firm.
Waste disposal and environmental
protection
If your device should become useless somewhere
in the future or you do not need it any longer, do
not dispose of the device together with your do-
mestic refuse, but dispose of it in an environmen-
tally friendly manner. Please dispose of the device
itself at an according collecting/recycling point. By
doing so, plastic and metal parts can be separated
and recycled. Information concerning the disposal
of materials and devices are available from your
local administration.
EC Declaration of Conformity
We, ikra GmbH, Schlesier Straße 36,
D-64839 Münster/Altheim, declare under our
sole responsibility that the product Electric Leaf
Blower FLB 3000 A1, to which this declaration
relates correspond to the relevant basic safety
and health requirements of Directives 2006/42/
EC (Machinery Directive), 2004/108/EC (EMC-
Guideline), 2011/65/EU (RoHS directive) and
2000/14/EC (Noise directive) incl. modifications.
For the relevant implementation of the safety
and health requirements mentioned in the Direc-
tives, the following standards and/or technical
specification(s) have been respected:
EN 60335-1/A15:2011; IEC 60335-2-100:2002
EN 62233:2008, EN 55014-1/A2:2011
EN 55014-2/A2:2008; EN 61000-3-2/A2:2009
EN 61000-3-11:2000
The object of the declaration described above com-
plies with the regulations of the EU Parliament and
Council Directive 2011/65/EU from 8 June 2011 to
restrict the use of certain hazardous substances in
electrical and electronic equipment.
measured acoustic capacity level 101,6 dB(A)
guaranteed acoustic capacity level 104,0 dB(A)
Conformity assessment method to annexe V /
Directive 2000/14/EC
The year of manufacture is printed on the name-
plate and can be additionally retrieved via the
consecutive serial number.
Serial number: 3158200179719 -
3158200250625
Münster, 11.08.2014
Gerhard Knorr, Technical Management Ikra GmbH
Maintenance of technical documentation: Gerhard
Knorr, Kärcherstraße 57, DE-64839 Münster
The sole responsibility for the creation of this Declaration of
Conformity rests with the manufacturer.
Guarantee
Dear Customer,
This device comes with a 3 year warranty from the
date of purchase. In the event of faults with this
product you have legals rights with respect to the
seller of the product. These rights are not affected
by our guarantee which follows hereafter.
Warranty conditions
The warranty period begins with the purchase
date. Please keep the original sales receipt safely.
This document is required as proof of purchase.
If a material or manufacturing fault should occur
with this product within three years of the date
of purchase, we will either repair or replace the
product at no charge to you, at our discretion.
This guarantee implies that the defective device
and the sales receipt (till slip) will be submitted to
us within the three year period along with a brief
written description of where the fault is and when
it occurred.
If the defect is covered by our guarantee then you
will receive a repaired product or a new product
back. There will no new guarantee period with the
repair or replacement of the product.
Guarantee period and legal claims for defects
The guarantee period is not extended by the
execution of the guarantee. This also applies to