Florabest FGS 72 A1 - Manual (Page 54)

54
GB
Technical data
Unit
Motor voltage ............................ 7.2 V
Blade movements or strokes
per minute .........................approx. 2200
Protection class ................................... III
Protection category...........................IPX0
Grass-trimming blade
Width of blades .........................93 mm
Shrub-trimming blade
Length of blades .......................120 mm
Distance between teeth ....approx. 8 mm
Weight (incl. accessories) .............. 1.6 kg
Sound pressure level
(L
pA
) .................59.1 dB(A), K
pA
=3 dB(A)
Sound power level (L
wA
)
guaranteed ...........................86 dB(A)
measured .........79.1 dB(A); K
wA
=3 dB(A)
Vibration (a
n
)
at handle ..........1.39 m/s 2 , K=1.5 m/s 2
Battery (Li-Ion)
Nominal voltage ......... 7.2 V 1.3 Ah
Loading time ...................... max. 3-5 h
Recharger ............. BHY410900400GS
Voltage input ....... 230-240 V~, 50-60 Hz
Nominal consumption .................... 16 W
Voltage output ..................................9 V
Recharging current ..................... 400 mA
Performance output.......................3,6 VA
Protection class ............................... II
Protection category...........................IPX0
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement. Technical and
optical alterations to serve progress may be
made without notice. All measurements, in-
structions and other data given in this man-
ual are therefore given without guarantee of
correctness. Legal claims made on the basis
of this manual are therefore excluded.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protecting the
user should be based on estimated expo-
sure under actual usage conditions (all parts
of the operating cycle are to be considered,
including, for example, times during which
the power tool is turned off and times when
the tool is turned on but is running idle).
Safety Instructions
This unit can cause serious in-
jury if not used correctly. Be-
fore using the unit, carefully
read through the instruction
manual and familiarise your-
self with all of its controls.
Symbols
Symbols in the manual
Warning symbols (instead of
the exclamation mark, the
danger may be explained)
with information on damage
and injury prevention.
Instruction symbols (the instruction
may be explained at the place of the
exclamation mark) with information on
preventing damage.