Epson 1290 User Manual

Page 27

Text mode
Original mode

Note:
EPSON recommends that you use a triangle or other tool to ensure
that the end of the roll is cut perpendicularly. A diagonal cut may
cause paper feed problems.

3. Once you have cut the paper, hold down the

roll paper

button for about 3 seconds. The paper feeds in reverse to a
position where it can be easily removed from the sheet feeder
at the back of the printer. If it does not feed to this position,
repeat this step.

4. Gently remove the paper. Then, press the

roll paper button

to clear the error light.

Your document has now been printed.