beautypg.com

Assembly, Operation – Florabest FRM 1800 A1 User Manual

Page 49

background image

49

GB

cable is damaged, it must be replaced

by the manufacturer, the customer serv-

ices of the same, or a qualified person,

in order to avoid hazards.

• Do not connect a damaged power

cable to the mains. Do not touch a

damaged power cable when it is

connected to the mains. A damaged

power cable may result in contact with

live parts.

Assembly

Disconnect the plug before any

work on the equipment. There is a

risk of injury.

Assembling the

Curved Handle

B

1. Remove the two pre-installed but-

terfly nuts (2a) and their screws

from the lawnmower housing

(7). Insert the lower bar (3) into

the slot on the lawnmower hous-

ing (7).

2. Fix the bottom bar (3) using the

two screws and butterfly nuts

(2a).

C

3. Fix the curved handle (1) using

the enclosed screws (16) and the

wing nuts (2b) on the lower bar

(3). There are two possible posi-

tions.

4. Clip the cable hooks (

A

10) into

the bar (3) and the handle (1) to

fasten the cable.

When both wing nuts are loosened,

the curved handle can be folded

down for storing the equipment.

Ensure that the power cable is not

caught.

Assembling the Grass Bag

D

Clip the fabric (18) into the up-

per tray of the grass collection

bag (4).

Hang the fabric (18) of the grass

collection bag (4) into the pipe

clip (19).

. The.textile.fabric.(18).of.the.

grass.bag.(4).must.be.passed.

over.the.inside.of.the.two.

side.stabilising.bars..The.sta-

bilising.bars.are.therefore.

visible.from.the.outside..See.

image.section.

Connect the handle (20) in one

of the two pieces of the collec-

tion box (4).

. Do.not.work.with.the.lawn-

mower.without.the.collision.

guard.or.lawn.box..There.is.

a.risk.of.injury.

The level gauge (21) is located on the side

of the grass catcher (4).

Flap (21) open:

grass catcher (4) empty

Flap (21) closed:

grass catcher (4) full

Operation

Hanging On / Removing the

Grass Bag

E

1. To hang on the grass bag (4),

lift the collision guard (9) and

hang on the grass bag. Fold the

collision guard (9) onto the grass

bag (4). It holds the grass bag in

the correct position.

This manual is related to the following products: