Florabest FBM 135 A1 - Manual (Page 10)

10
GB
General Description
The illustration of the princi-
pal functioning parts can be
found on the front and back
foldout pages.
Summary
1 Drive catch
2 Upper handle bar
3 Safety catch
4 Cold start lever (choke)
5a Bowden cable lock nut
5b Bowden cable adjusting nut
6 Lower handle bar
7 Cable clamp
8 Rear impact protection
9 Bowden cables
10 Oil filler cap with dipstick
11 Ventilations holes
12 Engine cover (finger protection)
13 Air filter box with
14 Air filter (no illustration)
15 Exhaust guard
16 Spark plug connector with
17 spark plug (no illustration)
18 2 front wheels
19 Sheet steel housing
20 Filler cap
21 Lever for cutting height adjust-
ment
22 2 rear wheels
23 Grass collection box carrying
handle
24 Grass collection box
25 Fill level indicator
26 2 quick-release levers for fixing
the bar
27 Starter cord guide
28 Starter handle with starter cord
29 Spark plug wrench
30 Bar slot
31 Nut on tensioning lever
32 Grass collection box protective
caps
33 Grass collection box suspension
bracket
34 Cut height position
35 Oil drain screw
Functional Description
The equipment is driven by a power-
ful four-stroke engine. The ball bearing
mounted wheels, the rear wheel drive
and the blade braking function make the
equipment easier to operate.
The equipment is fitted with a high quality
sheet steel housing and collapsible han-
dle bar.
Refer to the following descriptions for a
functional description of the controls.
Safety Equipment
3 Safety catch
The equipment stops when the
safety catch is released.
8 Rear and side impact protec-
tion
protect the operator from parts
that are flung out and from ac-
cidentally touching the blades
when mowing with no grass col-
lection box.
15 Exhaust guard
prevents hands or combustible
materials from coming into con-
tact with a hot exhaust.