Florabest FBM 550 A1 - Manual (Page 19)

19
GB IE
Technical Specifications
Engine ................4-stroke Briggs&Stratton
........................................550 Series (XHQ)
B&S Engine design number .. 10T8020201H1
Engine size ...................................158 cm 3
Power input ...................................... 1,83 kW
Blade rotation speed................. 2800 min -1
Blade torque ................................... 45 Nm
Wheel drive......................... max. 3.3 km/h
Petrol tank volume ..............................0.8 l
Octane rating ....................................95-98
Engine oil tank volume .......................0.6 l
Spark plug ..................Champion RJ19LM
Cutting circle .................................460 mm
Cutting height ............10-stage, 30-75 mm
Grass collection box volume................65 l
Weight (inc. collection box) ............30.3 kg
Sound pressure level
(L
pA
) ..................82.2 dB(A); K=3.0 dB(A)
Sound power level (L
WA
)
measured ......... 93.4 dB(A); K=2.14 dB(A)
guaranteed ...............................96 dB(A)
Vibration at the handle
(a
n
) .................... 4.644 m/s 2 ; K=1.5 m/s 2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
Disposal / Environmental
Protection
• Return the tool, accessories and
packaging to a recycling centre when
you have finished with them.
- Carefully drain the petrol and oil
tanks and take your equipment to
a recycling centre. The plastic and
metal parts that are used can be
separated by type and thus recy-
cled.
- Take used oil and petrol residues
to a disposal point and do not pour
them into the sewer system or down
the drain.
- Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
• Do not throw cut grass in the dust-
bin but rather compost it or spread it
under bushes and trees as a mulch
layer.