Florabest FHT 600 B2 - Manual (Page 12)

12
GB CY
Trouble Shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage not on
Check plug socket, cable, line and
plug, where appropriate, have re-
paired through electrical specialist
On/Off switch ( 6) de-
fective
Repair by Service Centre
Worn carbon brushes
Defective motor
Device runs with in-
terruptions
Power cable is damaged
Check the cable and have it
changed by the Service Centre if
necessary
Internal loose electrical
connection
Repair by Service Centre
On/Off switch ( 6) de-
fective
Blades become hot
Blades are blunt
Have the blades ( 2) sharpened
or replaced (Service Centre)
Blades are notched
Have the blades ( 2) checked
or replaced (Service Centre)
Too much friction due to
lack of lubrication
Oil the blades ( 2)
Spare Parts
Replacement parts may be ordered directly from our Service Centre (see p.29 for address).
When ordering, always specify the machine type and the part number in the exploded draw-
ing.
Item 18 (Exploded Drawing) ............Hand protection .......................Product No. 91092221