Florabest FHT 600 B2 - Manual (Page 11)

11
GB CY
been sent to us with the correct postage
paid.
Caution: The sender shall bear the cost of
any material damages during transport.
In case of complaint or for servicing, please
send your equipment cleaned and with an
indication of the defect, to our service ad-
dress.
Equipment sent in with freight collect
– by bulk freight, express or with other
special freight – are not accepted.
Defective units returned to us will be dis-
posed of for free.
Technical Data
Electrical Hedge Trimmer ..... FHT 600 B2
Input voltage rating ................230V~, 50 Hz
Input power ........................................600 W
Safety class ........................................... II
Protection category ..............................IP 20
Knife movements per minutes ............. 2800
Weight ................................................ 3.6 kg
Cutting length ..................................600 mm
Cutting capacity ................................ 24 mm
Blade cutting angle ......................... 38° ± 2°
Sound pressure level
(L
pA
) ....................84.4 dB(A), K
pA
=3 dB(A)
Sound power level (L
wA
)
guaranteed .................................98 dB(A)
measured .......96.1 dB(A); K
wA
=1.9 dB(A)
Vibration (a
n
)
at the handle ........ 2.248 m/s 2 ; K=1.5 m/s 2
at the bow handle 2.636 m/s 2 ; K=1.5 m/s 2
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions, ref-
erences and information in this instruction
manual are therefore not guaranteed. Legal
claims made on the basis of the instruction
manual can therefore not be considered as
valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure as-
sessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Waste Disposal and Envi-
ronmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Electrical machines do not belong in
domestic waste.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure grade,
which allows recycling. Ask our Service
Centre for details (see p.29 for address).
Defective units returned to us will be dis-
posed of for free.