beautypg.com

Ie cy gb – Florabest FRT 450 A1 User Manual

Page 11

background image

11

IE

CY

GB

Adjusting.the.height:

The telescopic tube enables you to adjust

the trimmer to your height.

‚

Release the screw sleeve.

(5). Adjust the telescopic

tube (6) to the required

length and retighten the screw sleeve.

Adjusting.the.spacing.bow..

(flower.protection):

The spacing bow keeps plants and stalks

that are not to be cut away from the cut-

ting lines. The spacing bow can be po-

sitioned behind the spacing roll (parking

position) when it is no longer required.

If the spacing bow (10) is no longer

required, it can be pushed away back-

wards (park position).

You can also disassemble the spacing

bow if not required (see “Assembling

instructions”).

Lengthening the cutting lines

Fully.automatic.dual.line.system

The equipment features a fully automatic

dual line system.

The lines will automatically elongate every

time you turn on the appliance. To support

proper line elongation, ensure that the coil

has stopped moving completely before

turning on the appliance again.

If the lines should be longer that defined

by the cutting circle then they will be au-

tomatically cut to the correct length by the

line cutter (

13).

Regularly check the nylon lines for

damage and whether the lines still

have the correct length defined by

the line cutter.

When.no.line.ends.are.visible:

• Renew the line spool (

15) (see

“Cleaning and maintenance”).

Adjusting.the.line.length.manually:

• Disconnect the plug from the mains

socket!

Press the retaining head (

14), re-

lease it again and pull the ends of the

cord out a little. Repeat this process

until the ends of the cord project a little

beyond the cord cutter (

13).

Cutting grass

WARNING..Danger.of.injury!

.

• Do not cut moist or wet grass.

• Before starting the trimmer check

that the cutting head will not

come into contact with stones,

rubble or other foreign bodies.

• Switch on the trimmer before you

approach the grass that is to be

cut.

• Always trail the extension cable

behind you. Do not pass the

operating trimmer over the exten-

sion cable as the cable could be

damaged.

• Do not overload the trimmer dur-

ing operation.

• Avoid contact with obstacles

(stones, walls, fences, etc.) as

this will rapidly wear out the lines.

• Do not deposit the cutting head

(

9) on the ground during op-

eration.

• Ensure that the cutting head

(

9) has stopped before you

deposit the equipment on the

ground.