Handling and operation – Florabest FTUS 3.6 A1 User Manual

Page 61

FTUS 3.6 A1

CAUTION

►

Never set the device up without the earth spike

■

The supplied earth spike

comes in two parts. You can either

use it with both components ﬁ xed together, or only use one com-
ponent to achieve a lower height.

■

Insert the earth spike

into the ﬁ xing for the earth spike

■

In order to guarantee optimum movement detection, the device
must be located so that the movement sensor

is pointing in the

direction of the area to be monitored.

■

The movement sensor

may not be blocked by other objects.

Wall mounting

♦

Drill a hole (ø 6 mm) and insert the wall plug

supplied. When

drilling, ensure that you do not inadvertently damage power, gas
or water lines.

♦

Screw the supplied screw

into the wall plug

so that ap-

proximately 1 cm of the screw

is protruding from the wall and

then hang the device onto it.

Handling and operation

To start operating the device, please note the following points:

Setting the movement sensor

♦

Turn the sensitivity regulator on the movement sensor

clockwise.

The sensitivity of the movement sensor

depends on the distance,

range or size of the animals to be detected. The smaller the animal,
the higher the preset sensitivity on the movement sensor needs to
be (max.).
If a larger animal such as a dog is to be detected, turn the sensi-
tivity regulator on the movement detector

anticlockwise (min.).

IB_30865_FTUS3.6A1_LB1.indb 58

17.10.14 10:25