Encore electronic 802.11n - Manual (Page 40)

Port Filter Settings
Items Information
Enable this Rule Mark to enable the configuration, and clear to disable.
Port Range
Fill in the port range that you are going to filter. The
valid numbers are 1~65535.
Protocol Select the protocol type of TCP, UDP or Both
Filter Mode Select the filter mode of Always or by Schedule
Date Define
Time Define For filter mode of by Schedule, you have to define the
filter date and time.
Action After configure the above settings, click Add to add a
new list in the following IP Filter Rule List. The
Change button can be used to change the
configuration.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
Port Filter Rule List
Lists the Port Filter Settings you have added before. Click on the list to change
configuration, or the Delete button to delete the list.
36