Encore electronic 802.11n - Manual (Page 18)

Router Settings
Items Information
IP address The IP of your Router LAN port (default 192.168.1.1).
Subnet Mask Subnet Mask of you LAN (default 255.255.255.0).
DNS Proxy DNS proxy takes DNS queries from the local network and
forwards them to an Internet DNS. Mark the check box to
enable DNS Proxy function or clear to disable.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
DHCP Server Settings
Items Information
Enable DHCP Server To give your LAN Client an IP, you have to enable DHCP
server. If not, manual setting up your client IP is necessary
when you want to use the router as your client’s default
gateway.
DHCP IP Range Specify the DHCP Client IP address range default
(100~150).
DHCP Lease Time The time for the device to recycle and give out DHCP IP
(default 86400).
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations .
DHCP Server Settings
The information of type, hostname, MAC, IP, description and expire time of the
DHCP clients that have connected with this device.
14