Encore electronic 802.11n - Manual (Page 38)

IP Filter Settings
Items Information
Enable this
Rule Mark to enable the configuration, and clear to disable.
IP Address Fill in the IP address that you are going to filter.
Protocol Select the protocol type of TCP, UDP or Both
Filter Mode Select the filter mode of Always or by Schedule
Date Define
Time Define For filter mode of by Schedule, you have to define the
filter date and time.
Action After configure the above settings, click Add to add a
new list in the following IP Filter Rule List. The Change
button can be used to change the configuration.
* Please click on the Save Settings button or the Reset Settings button on the above table
to save/reset the configurations.
IP Filter Rule List
Lists the IP Filter Settings you have added before. Click on the list to change
configuration, or the Delete button to delete the list.
34