Encore electronic ENL832-TX-ICNT - Manual

ENL832-TX-RE
&
ENL832-TX-RENT
ENL832-TX-EN
&
ENL832-TX-ICNT
10/100Mbps Fast Ethernet LAN Card
User's Guide
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits of a Class B
computing devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
If you suspect this product is causing interference, turn your computer on and off while
your radio or TV is showing interference. If the interference disappears then when you
turn the computer off and reappears then you turn the computer on, something in the
computer is causing interference.
Features & Specifications
Features & Benefits:
* Supports 32-bit PCI Bus Master for high performance and low processor utilization.
* Complies to PCI 2.1 and PCI 2.2 specification
* Complies with the IEEE 802.3 CSMA/CD, 10/100Base-TX standard.
* Full duplex design to double the performance to 20Mbps/200Mbps.
* One STP connector for 100Mbps or 10Mbps network speed.
* Support Auto-negotiation function.
* Built-in FIFO buffers to eliminate external memory.
* Auto-setups IRQ and I/O address.
* Supports early interrupt on transmit to increase performance.
* Supports Novell NetWare, Windows NT/98/ME/2000/XP and other popular
operating systems
* Provides diagnostic software
* Wake on LAN (If adapter supports WOL function).
* Topology : Star
* Connect to : RJ-45
1